Product Development and Structural Analysis of Oil Filter Case


1Pakalapati Srinivas  and 2 N. Amara Nageswara Rao

Department of Mechanical Engineering, NimraCollege of Engg & Tech, Vijayawada-521456. (AP)

Department of Mechanical Engineering, NimraCollege of Engg & Tech, Vijayawada-521456. (AP)



         An oil filter case is a filter designed to remove contaminants from engine oil, transmission oil, lubricating oil, or hydraulic oil. oil filter case are used in many different types of hydraulic machinery. A chief use of the oil filter case is in internal-combustion engines in on- and off-road motor vehicles, light aircraft, and various naval vessels. Other vehicle hydraulic systems, such as those in automatic transmissions and power steering, are often equipped with an oil filter case. Gas turbine engines, such as those on jet aircraft, require the use of oil filters. Aside from these uses, oil production, transport, and recycling facilities also employ filters in the manufacturing process.

       To develop a component using the 3D parametric software with the given inputs like purpose of the product, application, and where it is going to use with the required strength. After that parametric model is then exported to hyper mesh, there the geometry is meshed according to quality parameters. Now the finite element model is imported to analysis to check the product strength and ability to withstand all external and internal loads and compared with two different materials Mild Steel and Cast Iron.

At final we have to estimate the total cost of product and how much time it will take to produce the particular product in a better way.

Keywords: oil filter, product development, Finite element model



International eJournal of Mathematical Sciences, Technology and Humanities

Volume 2, Issue 5, Pages:  912 - 936